{"id":3594,"date":"2026-11-10T04:17:49","date_gmt":"2026-11-09T20:17:49","guid":{"rendered":"http:\/\/www.espacovipcv.com\/blog\/?p=3594"},"modified":"2026-11-10T04:17:49","modified_gmt":"2026-11-09T20:17:49","slug":"what-are-the-common-materials-used-for-stamped-parts-4307-de83e9","status":"publish","type":"post","link":"http:\/\/www.espacovipcv.com\/blog\/2026\/11\/10\/what-are-the-common-materials-used-for-stamped-parts-4307-de83e9\/","title":{"rendered":"What are the common materials used for stamped parts?"},"content":{"rendered":"<p>Hey everyone, if you\u2019ve ever held a metal phone case, a car door hinge, or even a kitchen sink basin, you\u2019ve interacted with stamped parts without even realizing it. As a stamped parts supplier, I get asked all the time: \u201cWhat are these parts even made of?\u201d It\u2019s a way more important question than most folks think\u2014because the material you pick for stamping can make or break a part\u2019s durability, cost, and how it holds up in whatever it\u2019s being used for. Today, I\u2019m breaking down the most common materials we work with here, and why each matters for different jobs. <a href=\"https:\/\/www.fabmann.com\/custom-fabrication\/stamped-parts\/\">Stamped Parts<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.fabmann.com\/uploads\/202116222\/small\/adjustable-post-supports02454570451.jpg\"><\/p>\n<p>First off, let\u2019s keep it real: stamping is all about shaping sheet metal (or sometimes other materials) into precise parts with tons of speed and consistency. The material you choose has to be malleable enough to bend, punch, or form into that shape without cracking or splitting mid-stamp. If it\u2019s too brittle, it\u2019ll snap; too soft, and it\u2019ll warp. That balance is everything, and after years in this game, I\u2019ve seen what works time and time again.<\/p>\n<p>Let\u2019s start with the big dog: steel. This is the workhorse of stamped parts, and for good reason. It\u2019s cheap, super strong, and comes in so many grades that we can match it to almost any need. Now, not all steel is the same. Low-carbon steel, also called mild steel, is the go-to for most basic stamped parts\u2014think metal brackets, washers, or even the frames for small appliances. It\u2019s easy to form, welds like a dream, and costs way less than most other metals. We use this for so many small orders because it\u2019s reliable and doesn\u2019t come with a huge price tag. But wait, mild steel rusts like crazy if you leave it out in the rain, right? That\u2019s why we also work with hot-rolled and cold-rolled steel for parts that need a little more surface smoothness or corrosion resistance. Cold-rolled steel is rolled at room temp, so it has way less surface imperfections, which makes it perfect for parts that get painted or finished later\u2014like car body panels or furniture hardware. Hot-rolled is cheaper, so we use that for parts where finish isn\u2019t a big deal, like structural brackets for construction.<\/p>\n<p>Then there\u2019s stainless steel, which is the superhero of steel materials. If you need a part that can handle water, chemicals, or extreme temperatures, stainless is the way to go. It\u2019s got chromium in it, which forms that invisible rust-resistant layer, so it doesn\u2019t corrode like regular steel. But here\u2019s the catch: stainless is way harder to stamp than mild steel. It\u2019s more elastic, so it springs back a little after you form it, which means we have to tweak our stamping dies to get the shape just right. That\u2019s why it\u2019s not for every job\u2014we save it for parts like food processing equipment parts, medical devices, or outdoor gear (like bike components that don\u2019t want to rust). We work with a few grades of stainless, too: 304 is the most common, it\u2019s versatile and affordable, while 316 is for even harsher environments, like marine parts where saltwater is a problem.<\/p>\n<p>Next up, aluminum. This is another fan favorite, especially for industries where weight matters\u2014like aerospace, automotive, and consumer electronics. Aluminum is super light (like, a third the weight of steel), corrosion-resistant on its own (it forms its own protective oxide layer, way thinner than stainless steel\u2019s), and easy to stamp. The only downside? It\u2019s softer than steel, so it can\u2019t handle as much heavy-duty stress. We use aluminum a lot for phone cases, laptop chassis, car body parts that need to be lightweight, and even heat sinks for electronics. The 5000 series (like 5052) is great for forming, so we use that for most consumer-facing stamped parts, while the 6000 series is stronger, so we save that for structural parts in cars or planes. Pro tip: aluminum can be tricky to weld if you don\u2019t do it right, but for stamped parts, we usually don\u2019t even need to weld it unless it\u2019s a multi-part assembly.<\/p>\n<p>Wait, what about non-metals? Yeah, we don\u2019t just work with metal stamped parts anymore. A lot of our clients ask for stamped plastic or even composite materials, especially for things like packaging, automotive interior parts, or electrical components. Thermoplastics are the most common here\u2014they\u2019re cheap, moldable when heated, and lightweight. Stamped plastic parts are perfect for things like bottle caps, wire connectors, or interior car trim because they don\u2019t corrode, don\u2019t weigh much, and can be dyed any color. There are also composite materials, like fiberglass-reinforced plastic, which are super strong and lightweight, used for things like boat parts or outdoor furniture. We have special stamping equipment for non-metals, too, because you can\u2019t use the same force you do for metal\u2014too much and you\u2019ll crack the plastic or composite.<\/p>\n<p>Now, let\u2019s talk about the materials we don\u2019t use as much, but still worth mentioning. Copper and brass, for example. They\u2019re soft, malleable, and have great electrical conductivity, so we use them for electrical parts like wires, connectors, or terminals. Brass is also used for decorative stamped parts, like doorknobs or jewelry components, because it has that nice golden finish. The downside? They\u2019re way more expensive than steel, and they tarnish over time, so we only use them when conductivity or appearance is non-negotiable. Then there\u2019s bronze, which is similar to brass but stronger, used for things like bearings or bushings that need to handle friction.<\/p>\n<p>I should also mention a quick note on how material choice ties to stamping efficiency. Like, if a client brings us a design that needs 10,000 identical brackets, mild steel is almost always the best call\u2014fast to stamp, low cost. If they need a part for a food processing machine that\u2019s going to be exposed to washdowns, stainless 304 is non-negotiable. If they\u2019re making a drone part that needs to be light but strong, aluminum 6061 is the way to go. We don\u2019t just pick materials randomly; we work with every client to weigh their needs: cost, durability, weight, appearance, and function. That\u2019s what separates a good stamped parts supplier from a great one, right? We don\u2019t just sell you a part\u2014we help you pick the right material for the job, so you don\u2019t end up with something that fails prematurely or costs way more than it should.<\/p>\n<p>Let me throw in a quick example to make this concrete. Last year, we had two clients: one was a small business making outdoor patio chairs, and the other was a startup making electric bike frames. The patio chairs needed stamped metal brackets to hold the legs together. We went with cold-rolled steel for those\u2014smooth finish so they could be powder-coated cheaply, strong enough to hold a person\u2019s weight, and way more affordable than aluminum. The e-bike client, though, needed stamped motor mounts. They needed parts light enough to keep the bike\u2019s total weight down, but strong enough to handle the motor\u2019s vibration. We used aluminum 5052 for those\u2014light, corrosion-resistant for the outdoors, and easy to stamp into the precise shape they needed. Both parts were stamped in our shop, but totally different materials, and both worked exactly as they should.<\/p>\n<p>Now, I get it, a lot of folks don\u2019t think about materials until they run into a problem. Like, \u201cWhy did my stamped rust in six months?\u201d Probably because they used mild steel instead of stainless or galvanized steel. \u201cWhy is this part bending too easily?\u201d Maybe they picked aluminum instead of a stronger steel grade. That\u2019s why we\u2019re here\u2014we\u2019ve spent years testing all these materials, knowing their limits, so we can guide you to the right choice.<\/p>\n<p>At the end of the day, stamped parts are only as good as the material they\u2019re made from. Even the best stamping dies and fastest production lines won\u2019t fix a bad material choice. That\u2019s why as a stamped parts supplier, we don\u2019t just process orders\u2014we consult. If you\u2019re looking for stamped parts for a new project, whether it\u2019s small brackets, electronic components, or something way bigger, we can walk you through which material makes sense for your budget and needs. We\u2019ve got experience with all the common (and some not-so-common) materials, so we can help you avoid headaches down the line.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.fabmann.com\/uploads\/202116222\/small\/cage-bracket-for-fish-farming36000464877.jpg\"><\/p>\n<p>If you\u2019re ready to chat about your project, hit us up to discuss your requirements, material options, and pricing. We\u2019re here to make sure you get the right stamped parts, every time.<\/p>\n<p><a href=\"https:\/\/www.fabmann.com\/waveguide\/\">Waveguide<\/a> References<\/p>\n<ol>\n<li>Dieter, G. E. (1986). Mechanical Metallurgy. McGraw-Hill.<\/li>\n<li>Groover, M. P. (2020). Fundamentals of Modern Manufacturing: Materials, Processes, and Systems. Wiley.<\/li>\n<li>ASM International. (2004). Materials Science and Technology: A Comprehensive Treatment, Vol. 7: Powder Metallurgy and Particulate Materials. ASM International.<\/li>\n<li>Kalpakjian, S., &amp; Schmid, S. R. (2014). Manufacturing Processes for Engineering Materials. Pearson.<\/li>\n<li>Stamping Industry Association. (2022). Material Selection Guide for Sheet Metal Stamping. Stamping Industry Publications.<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.fabmann.com\/\">Fabmann<\/a><br \/>Fabmann Ltd. is one of the most professional stamped parts manufacturers and suppliers in China, providing custom products with competitive price. Welcome to wholesale high quality stamped parts in stock here from our factory.<br \/>Address: Rm 102H-B, Nr.1440 Yan An Rd. (middle), Shanghai, China<br \/>E-mail: sales@keyiindustrial.com<br \/>WebSite: <a href=\"https:\/\/www.fabmann.com\/\">https:\/\/www.fabmann.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Hey everyone, if you\u2019ve ever held a metal phone case, a car door hinge, or even &hellip; <a title=\"What are the common materials used for stamped parts?\" class=\"hm-read-more\" href=\"http:\/\/www.espacovipcv.com\/blog\/2026\/11\/10\/what-are-the-common-materials-used-for-stamped-parts-4307-de83e9\/\"><span class=\"screen-reader-text\">What are the common materials used for stamped parts?<\/span>Read more<\/a><\/p>\n","protected":false},"author":606,"featured_media":3594,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3557],"class_list":["post-3594","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-stamped-parts-4b81-dec14f"],"_links":{"self":[{"href":"http:\/\/www.espacovipcv.com\/blog\/wp-json\/wp\/v2\/posts\/3594","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.espacovipcv.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.espacovipcv.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.espacovipcv.com\/blog\/wp-json\/wp\/v2\/users\/606"}],"replies":[{"embeddable":true,"href":"http:\/\/www.espacovipcv.com\/blog\/wp-json\/wp\/v2\/comments?post=3594"}],"version-history":[{"count":0,"href":"http:\/\/www.espacovipcv.com\/blog\/wp-json\/wp\/v2\/posts\/3594\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.espacovipcv.com\/blog\/wp-json\/wp\/v2\/posts\/3594"}],"wp:attachment":[{"href":"http:\/\/www.espacovipcv.com\/blog\/wp-json\/wp\/v2\/media?parent=3594"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.espacovipcv.com\/blog\/wp-json\/wp\/v2\/categories?post=3594"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.espacovipcv.com\/blog\/wp-json\/wp\/v2\/tags?post=3594"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}