{"id":3622,"date":"2026-11-11T18:16:09","date_gmt":"2026-11-11T10:16:09","guid":{"rendered":"http:\/\/www.espacovipcv.com\/blog\/?p=3622"},"modified":"2026-11-11T18:16:09","modified_gmt":"2026-11-11T10:16:09","slug":"can-butterfly-valves-be-used-in-immersion-cooling-for-data-center-racks-43bd-9b871b","status":"publish","type":"post","link":"http:\/\/www.espacovipcv.com\/blog\/2026\/11\/11\/can-butterfly-valves-be-used-in-immersion-cooling-for-data-center-racks-43bd-9b871b\/","title":{"rendered":"Can butterfly valves be used in immersion cooling for data center racks?"},"content":{"rendered":"<p>If you\u2019ve ever stood in a data center\u2019s hot aisle or watched a rack\u2019s front panel readout flash a temperature spike, you know the quiet, relentless problem every operator faces: keeping servers cool without wasting energy or risking costly downtime. For years, air cooling was the default, but as data density climbs\u2014modern racks now pack 10+ kilowatts per unit, some even higher\u2014air can no longer move enough heat fast enough without cranking power-hungry CRAC units and raising operating costs. That\u2019s where immersion cooling has emerged as the most promising alternative, a technology that submerges entire server racks in non-conductive liquid to strip heat away directly from components. As a supplier who\u2019s spent years building liquid cooling butterfly valves specifically for this exact use case, I get the questions every facility manager and engineer has right now: not just \u201ccan butterfly valves work here?\u201d but \u201cwill they hold up, perform, and make sense for my operations?\u201d Let\u2019s break this down\u2014no hype, just real-world insights from someone who\u2019s tested these valves in data center labs and field deployments. <a href=\"https:\/\/www.jianen-sanitary.com\/ai-data-liquid-cooling\/data-center-liquid-cooling-valve\/\">Data Center Liquid Cooling Butterfly Valve<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.jianen-sanitary.com\/uploads\/20150\/small\/iso-blank-flange3765b.jpg\"><\/p>\n<p>First, let\u2019s align on what immersion cooling for racks actually looks like, because not all immersion setups are the same. There are two main types: single-phase immersion, where liquid stays in liquid form as it absorbs heat (usually hitting 40\u201350\u00b0C before moving to a chiller), and two-phase immersion, where liquid boils at a low temperature, turns to vapor, then condenses back to liquid for reuse. Both rely on a closed-loop system to circulate liquid, and every loop needs reliable flow control, pressure regulation, and isolation for maintenance\u2014enter the butterfly valve. At its core, a butterfly valve is a quarter-turn valve that uses a disc to open or close flow; it\u2019s compact, lightweight, and low-cost compared to ball or gate valves, which makes it a natural fit for the tight, space-constrained racks and pipe runs in data centers. But before diving into suitability, we have to address the unique demands of immersion cooling applications, because these aren\u2019t the same valves you\u2019d use for a municipal water line or a chemical plant.<\/p>\n<p>Immersion cooling liquids, for starters, are not plain tap water. Most operators use dielectric fluids: either synthetic oils like mineral oil (a time-tested option that\u2019s low-cost but can degrade over decades of use) or engineered fluids like 3M\u2019s Novec, which are non-toxic, highly stable, and engineered for thermal efficiency but often slightly more viscous than water. These fluids don\u2019t conduct electricity, which is why they can submerge live servers, but their viscosity and chemical properties pose specific challenges for valve seals and materials. I\u2019ve seen cheaper butterfly valves designed for water fail here: standard EPDM seals can swell or break down when exposed to Novec\u2019s fluorochemicals, while certain metal alloys can leach ions into the fluid over time, risking server corrosion. For our valves, we spec food-grade, chemical-resistant FKM seals that are tested to withstand 10,000+ cycles of exposure to the most common immersion fluids, and 316L stainless steel bodies that resist leaching and pitting, even when the fluid\u2019s pH fluctuates slightly over years of operation. That\u2019s a non-negotiable detail\u2014if your valve materials react with the immersion liquid, you\u2019re not just replacing a valve, you\u2019re risking a whole rack\u2019s worth of servers.<\/p>\n<p>Next, pressure and flow control, the backbone of any immersion cooling system. In a single-phase loop, pressure typically runs between 20 and 80 PSI, depending on the rack\u2019s density and how far the liquid has to travel from the chiller to the rack\u2019s bottom inlet. Butterfly valves handle this pressure range with ease, but their real advantage here is in modularity. Data centers add new racks or adjust cooling capacity all the time; butterfly valves are compact enough to fit in the narrow pipe trunks between racks, and their quarter-turn operation means you can adjust flow on the fly without removing large components. I remember a client in Dallas who was retrofitting 50 legacy air-cooled racks to single-phase immersion and told me their old gate valves would take two technicians 45 minutes each to adjust, because you had to loosen bolts, remove the valve handle, and tweak the disc angle slowly. With our butterfly valves, one technician can adjust flow in 2 minutes per rack, which cut their installation and commissioning time by 60% and let them hit their target PUE (Power Usage Effectiveness) of 1.06 2 weeks ahead of schedule. That\u2019s the kind of real-world efficiency that matters when you\u2019re running a 24\/7 operation.<\/p>\n<p>For two-phase immersion, which is growing fast for high-density racks (15kW+ per rack, up to 50kW for some edge deployments), the demands are even higher. In these systems, flow isn\u2019t just about moving liquid\u2014it\u2019s about managing vapor formation. If flow is too high, you waste energy pumping liquid that never needs to be circulated; if it\u2019s too low, vapor can build up in the rack, creating hot spots on the top servers. Butterfly valves excel here because of their fine flow control: when you adjust the disc angle, you get a linear, predictable flow rate, unlike ball valves which have a sharp on\/off curve. We tested our valves in a two-phase immersion lab at Georgia Tech last year, and our butterfly valves maintained a flow accuracy of \u00b12% across the full 0\u2013100% opening range, which is more than enough to prevent both vapor buildup and over-pumping. One of the biggest myths here is that butterfly valves can\u2019t handle two-phase systems because of vapor, but in reality, the closed-loop design of most immersion setups means vapor is condensed back to liquid immediately before it reaches the valve, so the valve is always working with liquid, not gas. The only exception is if you place the valve in the vapor line itself, which is almost never done\u2014valves in immersion cooling loops are almost exclusively in the liquid supply and return lines, so that myth doesn\u2019t hold up.<\/p>\n<p>But wait\u2014what about downtime, the single biggest fear in data center operations. If a valve fails mid-operation, it can cause a leak, a flow cut, or even a complete shutdown of a rack, leading to thousands of dollars in lost revenue per minute. That\u2019s why reliability testing is non-negotiable for our valves. We\u2019ve done 50,000 cycle tests, simulating 15 years of regular use and adjustment, and our valves still hold a tight seal with zero leak points. We also design them with a fail-safe position: if the air power (or manual lever) fails, the disc stays in its current position, so flow isn\u2019t cut off abruptly, which prevents temperature spikes. I can speak to this personally because we worked with a colocation provider in Chicago that had a valve failure in an early immersion test setup a few years back. The old valve they used was a generic ball valve, and when its seal failed, it leaked oil into the rack, destroying 8 servers and costing them $120,000 in repairs and downtime. Since they switched to our valves, they\u2019ve had zero leaks in 2 years of operating 100+ immersion racks, which has been a game-changer for their SLA compliance.<\/p>\n<p>Now, let\u2019s talk about the flip side: when might a butterfly valve not be the best fit? It\u2019s not a one-size-fits-all solution. If you\u2019re running a small, temporary edge data center (less than 5 racks) with a low-density air-assisted immersion setup, a cheaper gate valve might work, but that\u2019s a rare case. If you\u2019re operating in a highly corrosive environment, like a coastal data center with salt air, you need to spec titanium butterfly valves instead of stainless steel, which we also offer. And for very high-pressure loops (over 100 PSI, which is unusual for most immersion setups), ball valves can offer slightly better sealing, but that\u2019s a niche case. For 90% of commercial and enterprise data center immersion setups, though, butterfly valves are the optimal choice: they\u2019re compact, low-cost, easy to maintain, and reliable enough to meet 24\/7 operational demands.<\/p>\n<p>I think a lot of engineers are skeptical when a valve supplier says their product works for a new technology like immersion cooling, and I don\u2019t blame them. When I started in this space 7 years ago, most valve manufacturers treated immersion cooling like a fad, and tried to repurpose their standard water valves, which failed spectacularly. We didn\u2019t take that approach\u2014we worked with immersion cooling system designers, server manufacturers, and data center operators to build valves specifically for this use case, from the seal materials to the flow control range. That\u2019s why today, our valves are in use in deployments across North America, Europe, and Asia, and operators consistently tell us they\u2019ve cut their cooling maintenance costs by 30% compared to their old air cooling or generic valve setups.<\/p>\n<p>At the end of the day, the question isn\u2019t \u201ccan butterfly valves be used in immersion cooling for data center racks?\u201d\u2014it\u2019s \u201care you using the right butterfly valves for your immersion cooling setup?\u201d Generic valves designed for water or oil lines won\u2019t hold up, but purpose-built, tested valves made to handle dielectric fluids, closed-loop pressure, and 24\/7 operation are not only compatible, they\u2019re a key part of making immersion cooling work efficiently and reliably. If you\u2019re planning to retrofit or build an immersion cooling rack, or you\u2019re looking to upgrade your current valve setup, I\u2019d be happy to walk through how our valves are designed for exactly this application, and answer any questions about material specs, testing, or deployment.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.jianen-sanitary.com\/uploads\/20150\/page\/small\/stainless-steel-clamped-tee0429d.jpg\"><\/p>\n<p>If you\u2019re ready to explore how purpose-built liquid cooling butterfly valves can streamline your immersion cooling deployment, reach out to discuss your project requirements and get a tailored solution.<\/p>\n<p><a href=\"https:\/\/www.jianen-sanitary.com\/extractor-and-beer-equipment\/\">Extractor And Beer Equipment<\/a> References<\/p>\n<ol>\n<li>ASHRAE. (2021). Immersion Cooling for Data Centers: A Practical Guide. ASHRAE Press.<\/li>\n<li>Georgia Tech School of Electrical and Computer Engineering. (2022). Flow Control Performance of Quarter-Turn Valves in Two-Phase Immersion Cooling Loops. International Conference on Data Center Cooling.<\/li>\n<li>U.S. Department of Energy. (2023). Energy Efficiency Metrics for Immersion Cooling in Enterprise Data Centers. Office of Energy Efficiency and Renewable Energy.<\/li>\n<li>Valve Manufacturers Association. (2022). Fluid Compatibility Standards for Dielectric Immersion Coolants. VMA Technical Bulletin 109.<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.jianen-sanitary.com\/\">Wenzhou Jianen Fluid Equipment Co., Ltd.<\/a><br \/>Wenzhou Jianen Fluid Equipment Co., Ltd. is one of the most professional data center liquid cooling butterfly valve manufacturers and suppliers in China, featured by quality products and good service. Please rest assured to buy bulk data center liquid cooling butterfly valve from our factory.<br \/>Address: No.655 Mingzhu Road ,Longwan District, Wenzhou, China<br \/>E-mail: annielin@lzginter.com<br \/>WebSite: <a href=\"https:\/\/www.jianen-sanitary.com\/\">https:\/\/www.jianen-sanitary.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>If you\u2019ve ever stood in a data center\u2019s hot aisle or watched a rack\u2019s front panel &hellip; <a title=\"Can butterfly valves be used in immersion cooling for data center racks?\" class=\"hm-read-more\" href=\"http:\/\/www.espacovipcv.com\/blog\/2026\/11\/11\/can-butterfly-valves-be-used-in-immersion-cooling-for-data-center-racks-43bd-9b871b\/\"><span class=\"screen-reader-text\">Can butterfly valves be used in immersion cooling for data center racks?<\/span>Read more<\/a><\/p>\n","protected":false},"author":961,"featured_media":3622,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3585],"class_list":["post-3622","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-data-center-liquid-cooling-butterfly-valve-480b-9c3ef1"],"_links":{"self":[{"href":"http:\/\/www.espacovipcv.com\/blog\/wp-json\/wp\/v2\/posts\/3622","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.espacovipcv.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.espacovipcv.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.espacovipcv.com\/blog\/wp-json\/wp\/v2\/users\/961"}],"replies":[{"embeddable":true,"href":"http:\/\/www.espacovipcv.com\/blog\/wp-json\/wp\/v2\/comments?post=3622"}],"version-history":[{"count":0,"href":"http:\/\/www.espacovipcv.com\/blog\/wp-json\/wp\/v2\/posts\/3622\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.espacovipcv.com\/blog\/wp-json\/wp\/v2\/posts\/3622"}],"wp:attachment":[{"href":"http:\/\/www.espacovipcv.com\/blog\/wp-json\/wp\/v2\/media?parent=3622"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.espacovipcv.com\/blog\/wp-json\/wp\/v2\/categories?post=3622"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.espacovipcv.com\/blog\/wp-json\/wp\/v2\/tags?post=3622"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}