As someone who’s spent the better part of a decade working with threaded inserts for metal—first as a technician testing insertion torque, then as a supplier fielding calls from aerospace engineers and small-batch furniture makers alike—I can tell you one thing for sure: anyone who claims to have a simple, one-size-fits-all answer to “what’s the price range of threaded inserts for metal” is either new to the industry or not paying attention. Over the years, I’ve seen customers come to us with $0.10 insert budgets and others who don’t bat an eye at $20 per piece because their application’s demands are non-negotiable. Let’s break this down the way we do with every prospective client: no fluff, no hidden fine print, just the factors that actually shift that price tag, and the ranges you can expect depending on what you’re building. Threaded Inserts for Metal

First, let’s get one critical term straight: threaded inserts for metal aren’t just a single part. They’re fasteners designed to embed into a pre-drilled hole in metal (think aluminum, steel, brass, or even titanium) to create a durable, threaded connection that’s way stronger than tapping the hole directly. Tap a hole in 16-gauge sheet aluminum, for example, and pull out a bolt—you’ll strip the threads 9 times out of 10. A threaded insert distributes that load evenly across the metal’s surface, making it the go-to for everything from aircraft wing components to outdoor patio furniture brackets. That functionality, and the variables that go into making it, is where the price range starts to branch out.
Let’s start with the biggest driver of cost: insert material. This is non-negotiable, because the material has to match both the host metal and the load your connection will carry. We make inserts in four core metal types, each with its own price point. The most affordable is carbon steel. These inserts are plain, uncoated, or sometimes zinc-plated for basic corrosion resistance—perfect for low-stress applications, like attaching plastic liners to metal HVAC ductwork or small electronic chassis panels. Right now, our carbon steel threaded inserts for metal clock in at a range of $0.12 to $0.45 per unit, depending on size and quantity. We recently sold a batch of 20,000 1/4”-20 carbon steel inserts to a HVAC parts manufacturer for $0.18 each, which is a typical bulk rate for standard sizes.
Next up is stainless steel. This is the workhorse for most industrial and outdoor applications. Stainless steel resists rust, can handle moderate to high loads, and doesn’t corrode when paired with things like aluminum (a common problem with carbon steel, which will galvanically react with aluminum over time). The price jumps here because stainless steel raw material is more expensive, and the manufacturing process requires tighter tolerances to avoid defects. Our stainless steel threaded inserts for metal are priced between $0.35 and $1.20 per unit. A few months back, a outdoor furniture maker came to us needing 5,000 M8 stainless steel inserts for their patio table legs—they paid $0.48 per unit, which makes sense because M8 is a common size and they ordered a mid-sized batch. The higher end of that range is reserved for larger diameters, like 1”-8 stainless steel inserts used in heavy equipment frames, which hit around $1.10 each for 1,000-unit orders.
Then there’s brass. Brass inserts are the priciest of the common industrial metal options, usually running $0.60 to $2.50 per unit. Wait, why so high? Brass is soft, which makes it ideal for applications where you’re going to install and remove bolts repeatedly—like equipment that needs regular maintenance, or decorative metal parts where a polished brass finish is part of the design. We also offer specialty materials, like titanium, for aerospace and medical applications. Titanium inserts are at the top end of the standard range, with a 5/16”-18 titanium insert running about $1.80 to $3.00 each, depending on the volume. We once had a space startup order 500 3/8”-16 titanium inserts for a satellite component, and they didn’t flinch at $2.70 each because weight and corrosion resistance were non-negotiable for their project.
The second biggest factor that shifts price is insert type and design. Not all threaded inserts for metal are made the same, and each design serves a specific purpose, with a corresponding cost. Let’s go through the main types we supply: press-in inserts, threaded inserts that get pressed into a pre-drilled hole with a hydraulic press or even a hand tool for small runs. These are the simplest, no-frills designs, so they fall right in the material ranges I mentioned earlier. The M6 brass press-in insert we sell for $0.75 each is a perfect example of this.
Then there’s knurled inserts. These have ridges (knurls) on the outer surface to grip the metal tightly, preventing rotation after installation. They’re a step up from press-in inserts, as they can handle higher torque and load, so they’re a little pricier. Knurled stainless steel inserts, for example, run $0.45 to $1.35 each, about 15% more than smooth press-in inserts of the same size.
Nut inserts and thread-forming inserts are two other common types. Thread-forming inserts are designed for thin-gauge metal (less than 1/8” thick), and they actually cut their own threads as you install them, eliminating the need for a separate tap. They require precision machining, so they’re a bit more expensive—our thread-forming stainless steel inserts are $0.55 to $1.40 each. Nut inserts, which are embedded into metal to create a female thread for attaching parts from the opposite side, are also a bit more complex to manufacture, so their price sits around the higher end of their material range, usually $0.40 to $2.20 per unit.
The third factor is size and order quantity. This is where a lot of first-time customers get surprised: small batches of large inserts are way more expensive than large batches of small inserts. Let’s take M3 inserts (3mm diameter, common in small electronics) vs. 1” diameter inserts (used in heavy machinery). An M3 carbon steel insert for a 10,000-unit order is $0.11 each, almost the floor of our price range. A 1” carbon steel insert for that same 10,000-unit order is $1.80 each, because the raw material is thicker, machining takes longer, and they’re less standardized, so we have to set up a separate manufacturing run for them. That’s a big difference, and it’s why size is such a key variable.
Order quantity also matters for bulk pricing, which is where most of our business comes from. For any insert type and size, if you order 1,000 units, you’ll pay the base price. Order 5,000, that drops to about 85% of the base price, and 10,000+ units usually gets you to 70-75% of the base. But we also do small runs—like 100 or less for prototype work—and in that case, price jumps because of setup costs. A 100-unit order of M4 brass inserts might be $0.85 each, versus $0.55 each for 5,000 units of the same size. That’s why we always ask customers for their order volume upfront; it’s the fastest way to narrow down a realistic price.
Wait, let’s also talk about specialty inserts and custom orders, because that’s where the price range can stretch even higher. We get requests all the time for custom threaded inserts for metal—maybe a unique shape for a medical device, a coated insert for extreme temperature environments, or a insert that’s compatible with a non-standard metal like magnesium. Custom designs require engineering time, tooling changes, and often smaller production runs, so those can run anywhere from $2.50 to $15 per unit, depending on the complexity. We recently worked with a medical device startup that needed a custom coated titanium insert for a surgical tool; they ended up paying about $12 per unit for a 500-unit order, because the coating had to meet strict biocompatibility standards.
Now, let’s put all this together to give you a clear, real-world snapshot of what you can expect. For most common applications—think furniture, consumer electronics, general industrial equipment—here are the typical price ranges, based on standard sizes and bulk orders:
- Carbon steel threaded inserts for metal: $0.10 to $0.50 per unit. Best for low-stress, non-corrosive environments; common sizes M3 to 1/2”-14.
- Stainless steel threaded inserts for metal: $0.30 to $1.25 per unit. The most versatile option for general industrial, outdoor, and food service applications; sizes M4 to 1”-8.
- Brass threaded inserts for metal: $0.55 to $2.60 per unit. Ideal for repeat assembly/disassembly and decorative metal finishes; sizes M5 to 3/4”-16.
- Specialty materials (titanium, copper, biocompatible coated inserts): $1.70 to $16 per unit. Reserved for aerospace, medical, and extreme-environment applications.
I should also mention what’s not included in these base prices, because that’s another common point of confusion. Installation tools, for example, aren’t part of the insert price. If you’re installing 10,000 inserts, you’ll need a press tool or a torque wrench designed for threaded inserts, which can cost from $50 for a hand tool to $500+ for a pneumatic press. We sell those too, but they’re a separate cost. Also, if you’re working with very thin metal (less than 1/16”), you might need a backing plate to prevent the insert from pulling through, which is another additional cost.
Over the years, I’ve learned that the best way to avoid sticker shock when ordering threaded inserts for metal is to be clear about three things with your supplier: what your application is (load, environment, how often you’ll disassemble parts), what size and thread type you need, and your order quantity. For example, a customer once came to us saying he needed “cheap threaded inserts for metal” for a boat he was building. When we dug deeper, he told us the inserts would be holding a 50-pound trolling motor bracket, exposed to saltwater, and he needed to be able to remove and reattach the bracket seasonally. We steered him toward M8 stainless steel knurled inserts, which cost $0.48 each—way more than the $0.10 carbon steel he initially wanted—but lasted far longer and would never corrode in saltwater. That’s the tradeoff: the cheapest insert isn’t always the best value.

If you’re in the market for threaded inserts for metal, whether it’s a prototype run of 100 units or a bulk order of 50,000 for a full production line, we can help you narrow down the right part for your budget and needs. We work with every material, size, and specialty requirement, and we’ve been supplying reliable threaded inserts to businesses across industries for over a decade. To get a personalized quote or ask any questions about your project, reach out to our team to discuss your specific needs and get a detailed breakdown of pricing and delivery times.
Plastic Insert References
- Fastener Technology International. (2022). Threaded Insert Materials and Application Guidelines.
- Industrial Fasteners Institute. (2023). Cost Factors for Threaded Inserts in Metal Assembly.
- Aerospace Industries Association. (2021). Specialty Threaded Insert Specifications for Aircraft Components.
Bai Ye Industrial Co., Ltd.
With abundant experience, we are one of the most professional threaded inserts for metal manufacturers and suppliers. We warmly welcome you to buy discount threaded inserts for metal for sale here from our factory. All customized products are with high quality and low price. Contact us for quotation.
Address: No.178, Sec. 2, Zhangyuan Rd., Huatan Township, Changhua County 503, Taiwan (R.O.C.)
E-mail: judy@ku-ping.com.tw
WebSite: https://www.baiyemfg.com/